UV-System for sea water

with high efficiency and monitor system

Content:

The advantages

Configuration

Technical data

Related Information:

Leaflet (printable version)

 

Related Products:

 


UV-System with PE reactor and separate electric cabinet

The advantages

Configuration

These UV units are suitable for corrosive media and sea water. The reaction chamber is made of high density polyethylene HDPE. The high efficiency lamps ensure optimal disinfection as well in cold as in warm waters. The UV-C power output is controlled by highly selective, calibrated UV sensor. You may install the reaction chamber vertical or horizontal. The electric cabinet is mounted separately.

Technical data

Type A10-PE B32-PE B60-PE B120-PE B160-PE B300-PE
max. flow in m3/h* 10.4 32.0 67.5 134 220 393
electrical connection in kW 0.17 0.38 0.57 0.95 1.33 2.84
flange adapters DN65 DN100 DN150 DN200 DN200 DN300
Reactor volume in litre 12.7 36 42 60 77 133
weight in kg 10 21 28 43 53 103
operation pressure max. 6 bar / 85 psi
Degree of protection IP65
type of UV lamp  SLR2581 SLR25113 SLR25143
UV-C output 254 nm in W per lamp 43 63 95
numbers of lamp 1 2 3 5 7 9
life time of lamp in h 10,000
dimension of cabinet,
L x W x D in mm		 295 x 310 x 175 760 x 760 x 300 800 x 1000 x 300 1200 x 1000 x 300
water temperature 5...35°C / 40...95°F
UV lamp Mercury low pressure lamp with amalgam indium endowment and high UV-C output
UV sensor Calibrated, certified ÖVGW, 100% day light insensible, accuracy ± 3 %, selectivity > 99% at 254 nm, temperature resistant at continuous operation until 70°C (158°F)
electric cabinet Selector switch for A-PE (manual - 0 - auto)
Selector switch for B-PE (test - 0 - normal)
SEC controller with blue keyboard display, fan (series B-PE), ballast, soft-start for ignition system, electronically surveyed single lamp control;
UV efficiency monitor with 2 limits and standard signal;
LED display: operation, pre-alarm, alarm;
LC-Display: W/m2 (UV intensity), operating hours (total, lamp), operation cycles, status message (selectable languages: German, English, French, Italian, Polish, Portuguese, Spanish);
potential free outputs: operation, pre-alarm, alarm, clearance flow;
analogue output "UV intensity": 0/4…20 mA (switchable).

* at 400 J/m2, transmission 98% at the end of life time